
17
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 4: BASIC OPERATION
4. Select HLS for the stream type from the Transport drop-down list.
FIGURE 4-14.
5. Enter a Program number for each stream in the Prog # field.
FIGURE 4-15.
6. Enter a description of the content in the Name field.The name field cannot exceed 7 characters. Spaces are not allowed in the
Name field because it is used as part of the address for HLS streaming.
7. Click the Apply button to save the changes or click the Reset button to discard any changes.
NOTE: Any input to the encoder can be configured to simultaneously output both a multicast and HLS stream. Select either
“UDP+HLS” or “RTP+HLS” in step 4 above. Be sure to set the IP multicast address and port number as described on the previous
pages.