31
CHAPTER 4: Programming the Voice Pro System
S
TEP
1: A
CCESS PROGRAM MODE FROM A CONNECTED STATION
1. Pick up the corded handset and listen for a dial tone.
2. Press
#
.
3. When prompted for the password, enter the default password 1 2 3 4 and
press
#
.
4. The system will verify the correct password.
NOTE
After three incorrect password attempts, you will be rejected from the
system.
S
TEP
2: I
DENTIFY INSTALLED TELEPHONE COMPANY LINES
1. When prompted for the program number, press
2
.
2. Press
#
.
3. Enter the installed line numbers:
a. If one line is installed, press 1.
b. If two lines are installed, press 1 2.
c. If three lines are installed, press 1 2 3.
d. If four lines are installed, press 1 2 3 4.
4. Press
#
.
S
TEP
3: S
ET THE CLOCK
1. Remain in programming mode, and when prompted for the program
number, enter
19
.
2. Press
#
.
3. Enter the hour (valid entries are
1
–
12
) and press
#
.
4. Enter minutes (valid entries are
00
–
59
) and press
#
.
5. Press
1
for AM or
2
for PM and press
#
. (Default is 12:00 PM)
For example, to set the time to 3:04 PM, dial
3#04#2#
. (3 is the hour, 04 is minutes,
and 2 is PM.)
