1
10/100BASE-T testing
at an affordable price.
Easy installation.
Large display and
LEDs keep you up to
date on faulty wiring.
Supports up to eight
remote units.
T
he LOCALMAP 100 checks for
all wiring faults found in
10/100BASE-T cabling including
open pairs, shorted pairs, crossed
pairs, reversed pairs, and split
pairs—on up to eight cables!
Installation takes just seconds.
Simply plug a remote unit
(included) into a wall jack and
attach your LOCALMAP 100 to
the other end of the cable.
When you press the start
button, the tester automatically
runs all tests and displays the
results on a large display. Red or
green LEDs indicate if pairs are
wired correctly.
With the tester, you can verify
or identify up to eight individual
cables. All you need are
Test all types of 10/100BASE-T
cabling with this affordable scanner.
Key Features
LOCALMAP 100 CABLE TESTER
additional remote units, which are
numbered for easy identification.
Order the tester alone,
or choose from two types of
testing kits:
• Identifier Kit for Plugs
Labeled 2, 3, and 4 features
the LOCALMAP 100 plus
three additional remote
units. With it, you can test
up to four wire pairs.
• Identifier Kit for Plugs
Labeled 5, 6, 7, and 8 gives
you four more remote units
for a total of eight. With it,
you can test up to eight
wire pairs.
When you need to take the
tester with you, you can order an
optional carrying case to hold
your LOCALMAP 100 and up to
eight remote units.
Black Box Corporation
• 1000 Park Drive • Lawrence, PA 15055-1018 • Tech Support: 724-746-5500 •
www.blackbox.com
•
e-mail: [email protected]
© 2003. All rights reserved.
Black Box Corporation.
11/21/2003
#12025
1/2
3/8
4/5
7/8
PAIRS TEST
GREEN
RED
- PASS
- FAIL
FAULTS/
CABLE LD.
1 - 8
PUSH TO TEST
FAULT CODES
O-OPEN
S-SHORT
R-REVERSED
SP-SPLIT PAIRS
C-CROSSED PAIRS
B-LOW BATTERY
4
3
2
1
The LOCALMAP 100 is the perfect cable-testing tool for networks
that rely on one system-support technician. The tester lets one user
check for all 10/100BASE-T wiring faults.
Typical Application
