Black Box SW625A-R3, Руководство пользователя

Страница: 19 / 24

18
PERSONAL SERVSWITCH™
5.1.4 W
ITH THE
K
EYBOARD
Keyboard is inoperable on one or more channels
Verify that the cables from the PC to the Personal ServSwitch are connected
properly. Verify that the keyboard is plugged into the keyboard port in the User
Console section on the rear panel of the single or base unit.
Verify that the keyboard works properly when connected directly to the
computer. If not, try a different keyboard.
If the keyboard still does not function, cycle power on all attached computers
and try again.
Keyboard is inoperable after switching channels or
Characters on screen do not match keyboard input
Some types of IBM compatible computers, particularly some PS/2s and high-end
servers, use unusual keyboard “scan modes.” This means that they interpret
keyboard signals slightly differently than most other computers. Try changing the
keyboard scan mode by using the keyboard command sequence
[CTRL][CTRL]
K n [ENTER] , where n is the number of the scan mode from 1 to 3 (2 is the default
used by most IBM compatible computers).