Page 6
Single Mode Fiber Optic A/B Switch (latching)
Installation
Place the switch in a convenient stable location and
connect the power supply unit to a reliable source of AC
power that meets the requirements shown in the
Specifications section of this manual. Then change the
front panel rotary knob to switch between the different
connection states to insure that the latching fiber optic
switch modules are in a known position before
connecting the switch to your fiber optic devices.
Connect the two fiber leads from the device to be shared
to the common switch port labeled C. Connect the
networks or other devices to the user selectable output
ports labeled A and B.
Your installation of this switch is now complete.
Troubleshooting
If the Fiber Optic A/B Switch fails to operate, check the
following before calling for technical support.
1. Ensure that the power supply connected to a power
source and to the switch.
2. Check the fiber optic connectors for proper
connections to the correct ports of the switch.
3. Operate the switch knob to verify that it’s tightly
secured to the switch shaft and does not spin loosely.
4. Verify the integrity of the fiber optic leads by
replacing a suspect lead with a spare.
Chapter 3: Installation
Chapter 4: Troubleshooting
