8
USER GUIDE
1.877.877.2269
BLACKBOX.COM
MULTI-HEAD MODE KM SWITCHING
When using computers with multiple displays, cursor control of selected channels allows switching be-tween computers
through the use of simple mouse clicks and gestures. No device driver is required. Sim-ply press the scroll wheel twice
and then move the mouse in the direction of the channel you desire to switch to.
Figure 8-1
Note:
This feature only works in Multi-Head display mode.
HOTKEY COMMANDS
The Hotkey command is a keyboard sequence used to trigger an action on the KM through the use of the keyboard
connected on the USB port of the KM. To activate the hotkey sequence, press the
CTRL
key twice and then enter the
desired hotkey commands.
Note: All commands can use upper and/or lower case characters
Table 8-2
Note: D
isplay Topology specifies the number of horizontal columns. The number of vertical rows is calcu-lated in the
software by 4/n columns.
+
Move the mouse to the
direction of the target
computer screen
COMMANDS
HOTKEYS
Single-Head Display Mode
CTRL + CTRL + K+ S
Multi-Head Display Mode
CTRL + CTRL + K + M
Display Topology (multiple rows)
CTRL + CTRL + H(1—4), (1-8) for KM-8P
Limit Input Ports (one row only)
CTRL + CTRL + W(1—4), (1-8) for KM-8P
Cursor Rolling (roll past display borders up,
down, left, and right)
CTRL + CTRL + O (0—OFF) or (1—ON)
Click the Mouse Wheel
Twice
