SM500A—Automatic Switching System
Black Box Corporation
37
990-000-0001-E8
5.3.19 SET RACK n IP ADDRESS x.x.x.x
Sets the rack IP address. Defaults to 192.168.0.1
5.3.20 SET RACK n NAME [name]
Sets the identifier
name
for rack
n
. The identifier
name
has a maximum length of 31
characters.
5.3.21 SET RACK n SNMP MANAGER x.x.x.x
Sets the IP address of the SNMP manager. SNMP traps are sent to this address.
Defaults to 0.0.0.0
5.3.22 SET RACK n SNMP READ COMMUNITY NAME name
Sets the Read Community Name to the string specified by the parameter
name
. The Read
Community Name defaults to
public
, and has a maximum length of 15 characters.
5.3.23 SET RACK n SNMP WRITE COMMUNITY NAME name
Sets the Write Community Name to the string specified by the parameter
name
. The Write
Community Name defaults to
private
, and has a maximum length of 15 characters.
5.3.24 SET RACK n SNMP TRAPS ON|OFF
Set trap transmission to be ENABLE or DISABLE. Defaults to DISABLE.
5.3.25 SET RACK n SUBNET MASK x.x.x.x
Sets the rack subnet mask. Defaults to 0.0.0.0.
5.3.26 SET RACK n SYSGANG ENABLE|DISABLE
This command is used to enable or disable the manual ‘SYSTEM GANG’ switching feature.
The ‘SYSTEM GANG ENABLE’ LED on the unit indicates the current state. When this
LED is ON, the system gang switching is enabled. To perform a system gang switch press
the SYSTEM GANG push button, and toggle the A/B GANG switch. When the LED is OFF
system gang switching is disabled.
Note: This command turns the manual system gang switch functionality on and off. However, it has
no effect on a system gang switch performed via the command ‘SET RACK n SYSGANG PORT A|B’.
5.3.27 SET RACK n TELNET IDLE TIMEOUT m
Defines the idle timeout, in minutes, for a telnet session. Parameter m has a range of 0-60
minutes, with 0 being defined as NO TIMEOUT. The default is set to 5 minutes.
5.3.28 SET RACK n TIME mm/dd/yyyy hh:mm
Used to set the date and time on the rack.
The date has the
mm/dd/yyyy
format, with
mm:
1 – 12
dd:
1 – 31
yyyy: 1980 – 2047
