Black Box ServSwitch SW721AE-R2, Руководство пользователя

Страница: 41 / 48

39
APPENDIX A: NVRAM Factory Defaults
Appendix A: NVRAM Factory
Defaults
The table below shows, for the ServSwitch’s saveable options, the default values
stored in nonvolatile memory (NVRAM) when the ServSwitch is shipped from the
factory. It also shows what commands or actions can change these settings for the
ServSwitch’s current operating period, as well as what commands or actions can
save changed settings to NVRAM, so that they become the new defaults.
Option Factory-Default To Change To Save
Setting Changes
Caps/Scroll/ Num Lock ON (fixed) Select port, then press the Can’t be saved
Num Lock corresponding button on
the keyboard
Scan OFF Push the SCAN button on Can’t be saved
the ServSwitch or type
[CTRL] S
(to turn ON) or
[CTRL] X
(to turn OFF)
Scan-Delay 5 seconds Type
[CTRL]T xx [ENTER] [CTRL] K
Time ( xx =any 1- or 2-digit number,
time in seconds)
Screen Saver’s OFF (disabled, set to Type
[CTRL]V xxx [ENTER] [CTRL]K
Delay Time zero) ( xxx =any 1- to 3-digit number,
time in seconds)
Keyboard Mode Mode 2 Select port, then type
[CTRL]K
[CTRL]M x
( x =1, 2, or 3)
Units 0 (no submasters) Type
[CTRL]U xxx [ENTER] [CTRL]K
( xxx =0 to 255)
Keyboard 43 (delay or 1 ⁄
2
second, Type
[CTRL]A xxx [ENTER] [CTRL]K
Typematic rate of 10.9 characters ( xxx =0 to 127; see
per second) Section 4.3.11 )