Black Box ServSwitch Octopus KV1701E, Руководство пользователя

Страница: 39 / 44

CHAPTER 6: TERMINAL OPERATIONS
39
Set the configuration IDs of all Octopus configurations that will be connected to the
same subnet as shown in the following table. Continue this numbering system for all
other Octopus configurations connected to the same subnet.
Octopus Configuration ID
System Configuration ID
system 1 000001
system 2 000002
system 3 000003
Set/Change Password
You can set the Octopus to a secure mode so that the Terminal Operations menu
cannot be accessed without first entering a password.
To activate security:
1. Select the Set/Change Password menu option. You will be prompted to decide
if you wish to continue. Enter a Y .
2. Type a password for this Octopus unit and press
Enter
. This password may be
up to 14 characters long.
3. You will be prompted to re-type the password. Once you complete this step,
security will be active and you will not be able to access Octopus Terminal
Operations without the password.
To change the password:
1. Select the Set/Change Password menu option.
2. You will be prompted to type the old password and a new one.
3. Re-enter the new password to verify.
CAUTION:
This password places your Octopus terminal in a secure mode. This password should be
guarded like any network password and care should be taken to avoid forgetting or misplacing
it. There are no means for recovering a lost password.
Exit
This menu selection will return you to the ready prompt.