background image

5. If the Local Unit’s LED shows that the link between the Units appears to be

working, make sure that the remote keyboard functions and that you’re
getting video at the remote site. (Be aware that in Dual-Access systems, remote
monitors, keyboards, and mice might take up to several seconds to be
properly initialized; see 

Section 7.3.3

. Note also that the video quality might

be poor at this point if your interconnect cable is longer than 25 m [80 ft.]
and you haven’t set the Extender’s DIP switch to compensate for this; see

Section 5.1

.)

6. Make sure the remote mouse functions. (If your PC normally boots up in

DOS, you will need to run Windows or some application that supports the
mouse.)

7.

KVM/Serial/Audio systems only:

Make sure that any serial device attached to

your Remote Unit is working. You might need to load a driver or run an
application in order for the CPU to be able to detect and handle the serial
data.

8.

KVM/Serial/Audio systems only:

Make sure that any audio devices attached to

your Remote Unit is working.

If everything works in your test setup, repeat the above steps for your actual
installation. If everything works in the actual installation, your ServSwitch™ Brand
CAT5 KVM Micro Extender system should be ready for continuous operation.

41

CHAPTER 6: Installation

Содержание ServSwitch ACU3001A































































Отзывы: