Black Box ServSwitch ACU2500A, Руководство пользователя

Страница: 12 / 20

724-746-5500 | blackbox.com
Page 12
ACU2500A
Chapter 3: Installation
3. Installation
Before you can install the product, you need to prepare your site:
1. Determine where the computer is to be located and set up the computer.
2. Determine where you want to locate the remote desktop, including the monitor, keyboard, mouse, and any other USB
device(s).
3. If you are using surface cabling, the product supports a maximum distance of 330 feet (100 m).
OR
If you are using premise cabling, make sure CAT5e cabling is installed between the two locations, with CAT5e information outlets
located near both the computer and the USB device(s), and the total length, including patch cords, is no more than 330 feet
(100 m).
Home theater PC
(source)
HDMI cable
Local
Extender
Remote
Extender
USB devices
Up to 330 feet (100 m)
between units over CAT5e
(or better) cable
HDMI cable
HDTV/monitor
(sink)
USB cable
USB cables
USB cable
Keyboard
Joystick
Mouse
Figure 3-1. Typical installation.
3.1 Installing the Local Extender Unit
1. Place the Local Extender unit near the computer.
2. Connect the supplied USB cable to the USB port on the Local Extender, and an available USB 2.0/1.1 Type A Port on the
computer.
3. Connect the supplied HDMI cable to the Local Extender (HDMI In), and an available HDMI port on the computer.
3.2 Installing the Remote Extender Unit
1. Place the Remote Extender unit near the monitor and USB device(s) in the desired remote location.
2. Connect an HDMI cable (not included) to the Remote Extender (HDMI Out) to the monitor.
3. Plug your USB Device(s) into the USB ports on the Remote Extender.
3.3 Connecting the Local Extender to the Remote Extender
With Surface Cabling
1. Plug one end of the CAT5e cabling (not included) into the Link port (RJ-45) on the Local Extender unit.
2. Plug the other end of the CAT5e cabling into the Link port (RJ-45) on the Remote Extender unit.