36
SERVSWITCH™ BRAND FIBER KVM EXTENDERS
5.4 Running Fiber Cable Between the Local and Remote Modules
You’ll need breakout-style fiberoptic cabling with at least five fibers to connect the
Extender’s Local Module to its Remote Module. What type of cable(s) you use will
depend on where you’re going to run them:
•
Indoors:
Use bulk preterminated cable (such as product code EFN1006A-ST
for six fibers, EFN1008A-ST for eight fibers, etc.—specify length) or cable
you’ll terminate yourself (such as EFN1006A for six fibers, etc.) for your direct
indoor runs between Local and Remote Modules.
•
Outdoors (Moderate):
First use our preterminated ServSwitch Fiber Patch
Cord (product code EFN235 for ACS235A or EFN236 for ACS236A) to run
from the Local or Remote Module to the demarc (demarcation point). Then
use bulk loose-tube outside-plant cable, either the preterminated type (such as
product code EFN3006A-ST for six fibers, EFN3008A-ST for eight fibers, etc.—
specify length) or the type you’ll terminate yourself (such as EFN3006A for six
fibers, etc.) for your direct outdoor runs in mild to moderate conditions
between Local and Remote Modules.
•
Outdoors (Extreme):
First use our preterminated ServSwitch Fiber Patch Cord
(product code EFN235 for ACS235A or EFN236 for ACS236A) to run from the
Local or Remote Module to the demarc (demarcation point). Then use bulk
armored outside-plant cable (such as product code EFN4070A-1000 for a
1000-ft. [304-m] spool of unterminated 6-fiber type or EFN4075A-1000 for
similar 12-fiber type) for your direct outdoor runs in extreme conditions
between Local and Remote Modules.
Connect five of the strands of the cable that will be directly attached to the
Extender Modules to the corresponding ST
®
female connectors on the back of the
Modules:
• Red dot “R” strand to red dot “R” port (red color signal);
• Green dot “G” strand to green dot “G” port (green color signal);
• Blue dot “B” strand to blue dot “B” port (blue color signal);
• Black dot “1” strand to black dot “1” port (other signals, one direction)—the
fourth
port from the left on the Local Module, the
fifth
port from the left on
the Remote Module; and
• White dot “2” strand to white dot “2” port (other signals, other direction)—the
fifth
port from the left on the Local Module, the
fourth
port from the left on
the Remote Module.
Содержание ServSwitch ACS235A
