Black Box ServPower Omni PS730A, Руководство пользователя

Страница: 20 / 20

ServPower Omni
18
6. CLI Operation
6.1 Command Line Interface
The Command Line Interface follows a set/get syntax similar to SNMP.
All configuration is performed from the CLI. It can be accessed via
Telnet Client, Serial Port and Dial-up Modem, using a Terminal client.
Below is a listing of all interface commands and syntax.
CLI Interface using Telnet Client
CHAPTER 7: Advanced Features
19
6.3 Device Commands
get device name
set device name <name>
Each ServPower Omni can have
a name assigned. 20
characters Max, no spaces.
get current
Returns the current draw for
each Main in Amperes
set password <oldpass>
<newpass> <confirm>
Sets the password for the
current user
get cycle
set cycle <n>
The cycle time is the length of
the reboot or power on. In
seconds 0 - 99
get delay
set delay <n>
The delay time is the pause
between power up of each
outlet when multiple outlets
are powered on. 0 - 99
logout
Ends the session
The following commands require administrative rights
get current alarm
set main <a/b> highalarm
<nn.n>
set main <a/b> lowalarm <nn.n>
High and Low alarms are used
to monitor current conditions
and send an alert by email or
SNMP when the high or low
thresholds are exceeded.
From 0.1 to 15.0 (20.0 in 20
amp units) in 0.1 amp
increments. Main A and Main
B are set separately, but
displayed together with the
get command.
get console
Display current console
configuration
set console timeout <30-
3600/disable>
Console can be set to
automatically logout with no
activity for 30 seconds to 1 hr
in seconds, or disabled.
set console baudrate <baud>
2400, 4800, 9600, 19200,