1000 Park Drive • Lawrence, PA 15055 • 724-746-5500 • Fax 724-746-0746
© Copyright 2005. Black Box Corporation. All rights reserved.
1)
Remove the four mounting brackets from the assembled shelf by removing the four screws per bracket
(two on the top and two on the bottom).
2)
Mount the four mounting brackets on the mounting rails (at the desired height) as shown in Figure 1
using two 10-32 screws per bracket. Tighten the screws.
3)
Slide the shelf onto the mounting brackets so that the mounting brackets are inside the mounting
channels, as shown in Figure 2.
4)
Replace the four screws per mounting bracket (two in the top and two in the bottom) so that the shelf is
now secured to the mounting brackets. (See Figure 2.) Tighten all screws.
5)
Attach wrist pad to keyboard tray by removing double-sided tape and placing firmly to tray.
Figure 1
Figure 2
Mounting
brackets
Mounting
screws
Shelf
assembly
