19" STEEL DISTRIBUTION RACKS
3
Assembling the Rack
NOTE
Finger-tighten any nuts or screws when assembling the rack. Once the entire rack is
assembled, use a screwdriver or wrench to completely tighten all nuts and screws.
1) Find the base and place it on the floor.
2) Attach the right side channel with the panhead slotted screws and the hex nuts.
3) Attach the left side channel with the panhead slotted screws and the hex nuts.
4) Attach the top cross supports with the panhead slotted screws and the hex nuts.
5) Attach the corner gusset supports (either 2 or 4, depending which model you have; see the specifications)
with the panhead slotted screws and the hex nuts.
6) If you’d like to attach panels to the Rack, use the included 10-32 x
3
⁄
4
large panhead slotted, plated screws.
Содержание RM390A-R2
Страница 3: ......
