Black Box QCE12U Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 20

Black Box QCE12U Скачать руководство пользователя страница 11

Page 11

724-746-5500 | blackbox.com

Chapter 3: Preparing the Cabinet for Installation

Table 3-1. Quick fit soundproof blanking panels.

Rack Units

Description

Part Number

1U

1U high, 19" wide blanking panel

*Contact Tech Support.

2U

2U high, 19" wide blanking panel

*Contact Tech Support.

3U

3U high, 19" wide blanking panel

*Contact Tech Support.

5U

4U high, 19" wide blanking panel

*Contact Tech Support.

*Contact Black Box Technical Support at 724-746-5500 or [email protected].

The cabling runs from the front 19" face to the rear of the cabinet via the top
and bottom of the left-hand and right-hand infills once installation is finished or
following any refits. Fill the resulting air gaps around the cabling with the supplied
infill foam (see Figure 3-3).

3.6 Cable Management

The QuietCab Elite is fitted with six cable entry positions, three on both the lid
and base, fitted to the rear and to each side of the cabinet (see Figure 3-1).

Gland plates

Gland plates

Figure 3-1. The cabinet has three cable entry points via removable gland plates

fitted to the top cover shown and three more fitted to the base.

«
...
9
10
11
12
13
...
»

Содержание QCE12U





















Отзывы:

Нет отзывов