Data
Voice
Hotline
D
H
V
Secure Power Switch
Master 8 - Port
Configuration through an RS232 Terminal connection
1. Use the provided RS232 cable to connect the
Power Switch to an available serial port of your PC.
2. Run a Terminal program such as Windows Hyper
Terminal.
3. Configure the appropriate serial port @ 9.600, n, 8, 1 and
no flow control.
4. On your computer, press <ENTER> until the prompt «>»
appears on your screen.
5. Press the <TAB> key on your keyboard and follow the
menu to configure your Power Switch. All commands
start with the slash «/». Ex.: type the command /NP to go
to the Network Parameters settings menu.
2/ Configuration
Use one of the three following methods:
Configuration through the LAN
using the PS-Finder program
It is the simplest and fastest configuration method if you
use Windows as operating system.
It allows to configure your Power Switch through your
local network even if its network parameters are not
compatible with those of your PC.
1. Start the PS-Finder.exe program contained on the CD-
ROM.
2. In the tool bar, click on the first left button (
Scan
) to
discover the Power Switch connected on your LAN.
3. In the tool bar click on the second left button (
Configure
)
and configure the network parameters.
NETWORK INTERFACE PARAMETERS:
Should this target obtain IP
settings from the network?[N]
Static IP address [192.168.1.250]?
Subnet Mask IP address
[255.255.255.0]?
Gateway address IP address
[192.168.1.2]?
Primary DNS Server address IP
address [192.168.1.2]?
Secondary DNS Server address IP
address [0.0.0.0]?
MISCELLANEOUS:
Finder program enabled?[Y]
To achieve the highest security level, we suggest to disable the Finder program after the first
installation by unchecking the option "Finder authorized".
If you change the IP address, the system needs to compute new SSL keys. This operation takes
several minutes and the Led marked "S" blinks 3 times repeatedly during the process. During this
time, you cannot login.
The serial connection enables you to use following
commands:
/viewlog
Displays the log file
/initlog
Clears the log file
/initsslkey
Computes new SSL keys
/initadminaccount
Restores default admin. password
/restorefactconf
Restores factory default settings
/help
Displays this help
/?
Displays this help
Configuration through the LAN
using a standard Browser
Change temporarily the network settings of your PC
according to the default network settings of the Power
Switch.
Default network parameters of the Power Switch:
IP Address: 192.168.100.200 - Port: 443
Gateway: 255.255.255.0
Default factory protocol is HTTPS!!!
1. Start your Web browser and type the IP address of your
Power Switch.
2. Enter the administrator name and password (default for
both = admin). The home page appears, allowing you to
configure the settings of your Power Switch.
About the option “DHCP Client enabled”
If you enable the DHCP option, we suggest that you use Static DHCP so that the same IP address
is always assigned to the Power Switch.
You will find the MAC address of your Secure Power Switch on a sticker on the bottom of the box.
If a new IP address is attributed by the DHCP server, the system needs to compute new SSL keys.
This operation takes several minutes.
Remarks
