5
REMOTE POWER MANAGER QUICK START GUIDE
WARNINGS AND CAUTIONS
Secure Racking
If secure racked units are installed in a closed or multi-unit rack
assembly, they may require further evaluation by certification agencies.
Consider the following items:
1. The ambient temperature within the rack may be greater than the
room ambient temperature. Installation should be such that the
amount of airflow required for safe operation is not compromised.
The maximum temperature for the equipment in this environment is
122°F (50°C).
2. Install the unit so that it doesn’t become unstable from uneven
loading.
Input Supply
Check nameplate ratings to ensure that there is no overloading of
supply circuits that could have an effect on overcurrent protection and
supply wiring.
Grounding
Maintain reliable grounding of this equipment. Give particular attention
to supply connections when connecting to power strips, rather than
direct connections to the branch circuit.
Shock Hazard
Do not attempt to repair or service this device yourself. Internal
components must be serviced by authorized personnel only.
Disconnect Power
If any of the following events occurs, immediately disconnect the unit
from the outlet and contact Black Box at 724-746-5500.
1. The power cord is frayed or damaged.
2. Liquid has been spilled into the device or the device has been
exposed to rain or water.
Disconnect the Power Supply Cable(s)
The PS565A and PS565AE include one power supply cable. The PS567A
and PS584A include two separate power circuits with a power supply
cable for each circuit. Before attempting to service or remove this unit,
make certain that the power cable (for PS565A or PS565AE) or both
power cables (for PS567A or PS584A) are disconnected.
