7
SERIAL
↔
PARALLEL CONVERTER V AND V-DB25
3.2 Detailed Switch Settings
This section describes the function of each DIP
switch and lists all possible settings.
Switch 1: Hardware/Software Control
The setting for Switch 1 determines whether these
interface converters will control either hardware or
software flow control.
Flow Control
SW1
Hardware
OFF
Software
ON
Switch 2: Enable/Disable the LED Indicator
The setting for Switch 2 determines whether the
LED indicator is enabled or disabled.
LED
SW2
ON
ON
OFF
OFF
Switches 3 through 5: Data, Parity, and Stop Bit
Switches 3 through 5 are used to specify the data,
parity, and stop bits. The table at the top of the
next page shows the settings that may be used.
