Black Box PI035A, Инструкция по эксплуатации

Страница: 17 / 26

13
CHAPTER 4: Operation
Once you’ve installed the S
↔
P Converter (128K), run a few test
transmissions. If one or more don’t get through intact, see
Chapter 5:
Troubleshooting
.
If at any time something goes wrong with a transmission, you can press
the Reset button to reset the Converter without having to unplug it or
restart your devices. Also see
Chapter 5
for troubleshooting suggestions.
After the Converter is up and working properly, few adjustments should
be necessary. Every so often, especially (1) at system boot time if your
system is powered down frequently or (2) any time your system performance
seems to deteriorate, you might want to set the Converter to perform its
self-test (DIP switch position 6 to ON). The self-test could reveal, or make it
easier to diagnose, a problem. If a problem does become evident, see
Chapter 5
.
Any time you upgrade or replace a serial device connected to your S
↔
P
Converter, reposition the Converter’s baud-rate, word-structure, flow-
control, and DTE/DCE switches as necessary.
4.0 Operation