82
LASER CARDS FOR HP 4000 TWINAX AND COAX PRINTERS
Table 9-1 (continued). Host-Download Commands.
Description
Command
Suppress IBM Control Codes
36
True LPI Spacing
38
Truncate/Wrap Select
31
Valid FF at End of Print Buffer
18
Valid FF Followed by Data
17
Vertical Channel Select (VCS)
37
9.2 Configuration Options
In the command descriptions an asterisk (*) identifies the factory-default selection.
Commands take effect immediately unless noted otherwise. Any errors cause the
interface to ignore the command and continue printing. For a command to be
permanently stored in permanent memory, the command Z99,0 must be used.
RPQs are only active in LU3 (non-SCS) mode.
COMMAND 1: BUFFER SIZE
Selects logical default buffer size.
VALUE
DESCRIPTION
1
960 characters
*2
1920 characters
3
2560 characters
4
3440 characters
5
3564 characters
*Factory-default setting.
