The cursor symbol "
>
" is moved around the screen to the required field using the
arrow
keys
.
Changing Parameters
If it is possible to modify the field over which the cursor is placed pressing the
<SPACEBAR> will toggle through the parameters available. Link parameters are only
adjustable if <CTRL> and A are keyed in advance. No change is possible if the field is
calculated, unchangeable or hardware set.
Pressing the <SPACEBAR> will toggle through the choices available for a parameter.
Accepting Changes and Updating the Configuration
If the
CONFIGURE
parameter is selected to
ACCEPT
after the configuration has been
suitably adjusted, the configuration is updated at the local and remote end as necessary and
held in Non-Volatile Memory (NVRAM.)
Abandoning Changes
Pressing
<CTRL>
and
<C>
together at any point before a configuration is updated will cause
all modifications to be abandoned and the last updated configuration will be represented on
the screen.
Alternatively if the cursor remains unmoved for thirty seconds when in ENTER mode, the
cursor marker will automatically return to the
CONFIGURE
line and revert to
ACCEPT
.
The original configuration is maintained and any parameter changes will be lost.
Local or Remote Configuration
Most settings are independent at each end of the multiplexer link e.g. Signals, Clocks, and
Rates. The "
Display Page
" parameter in the upper left of the selected screen shows whether
the LOCAL or REMOTE multiplexer is being configured.
Screen Messages
