16
G.703 MODULES, MODULE PANEL, AND CHASSIS
4.3 Connecting the 75-Ohm BNC Ports
The 75-ohm BNC ports on the front of the Chassis are
labeled “TX” (Transmit Data Output) and “RX”
(Receive Data Input). Simply connect the G.703 lines as
follows:
G.703 Network
G.703 Balun Module
BNC Connector
BNC Connectors
TX................................................RX
RX ..............................................TX
NOTE
The total allowable cable lengths are subject to the
constraints of the ITU/CCITT G.703 recommendation.
However, we recommend a total patch-cable length,
including coaxial and twisted-pair cabling, of no more than
320 feet (200 m).
Содержание MT243A
Страница 3: ......
