Black Box MediaCento UVX-HDMI-POE-RX, Руководство пользователя, Страница: 22 / 32

724-746-5500 | blackbox.com
Page 22
Chapter 7: Advanced Commands
7. Advanced Commands
These are advanced configurations and require knowledge of IP networking
protocols and multicasting. Do not attempt to run any commands, modify files, or
change any other settings apart from the specific configurations noted here. All
commands are case-sensitive.
To list names and IP information of all connected MediaCento IPX devices, type in:
node_list
To view all current configured parameters, type in:
astparam dump
To reset to factory default, setting the IP mode to autoip and removing any
overrides, type in:
reset_to_default.sh
To change the baud rate of the serial extension interface, type in:
stty X –F /dev/ttyS0
(replace X with desired baud rate)
To disable/enable the link for a specific device, type in:
ast_send_event -1 e_stop_link
ast_send_event -1 e_reconnect