15
CHAPTER 3: Software Installation
• ATM Virtual Path ID (VPI)*
• ATM Virtual Circuit ID (VCI)*
• Encapsulation type*
• Modulation type*
*NOTE
Required if not using default values for driver type.
• User Name (for PPP applications only)
• Password (for PPP applications only)
3.1 Software Setup
Before starting the software setup process, close all Windows programs previously
running on your PC.
1. Insert the installation CD into the CD drive. The installation wizard will be
launched automatically. Click on the Drivers icon. The user can also launch
the installation wizard by double clicking on the file “Setup.exe” in the root
directory of the installation CD.
2. The “Welcome” window provides an opportunity to quit the setup process to
exit all Windows programs before continuing. If the Windows programs were
previously closed, click Next.
3. The “Select ISP” window allows you to specify your DSL service provider. A list
of service providers is displayed. Default values for the Type of Driver, ATM
Virtual Path ID (VPI), ATM Virtual Circuit ID (VCI), Encapsulation type and
Modulation type are provided for each DSL service provider listed in the
window.
If your DSL service provider is listed and you would like to accept the default
values, highlight the provider’s name and click Next. Continue with Step 5 on
the next page.
If your DSL service provider is listed and you would like to change the default
values, highlight the provider’s name and click Customize. Continue with
Step 4a on the next page.
If your DSL service provider is not listed, select Other Service Provider and
click Next. Continue with Step 4b on the next page.
