manualshive.com logo in svg

Black Box MC115A, Руководство пользователя

Поделиться
Скачать
Black Box MC115A Скачать руководство пользователя страница 26

26

MOBILE LINC-UP

NOTE

1. The Mobile Linc-Up may require a custom factory setting

for this phone set.

2. Not enough data was available to determine whether the

phone system will support autodialing with the Mobile
Linc-Up.

3. The Mobile Linc-Up will not support autodial on Model

7300 telephones.

4. You may have to dial an outside access number, such as

9, on the telephone before autodialing.

5. This telephone has nonstandard handset wiring and is not

compatible with the Mobile Linc-Up.

6. The Mobile Linc-Up requires the use of a special adapter

cable set. This phone has non-standard handset wiring.

7. When the phone is autodialing, you must dial a number on

the keypad of the telephone set to maintain the line.

8. These phone systems may be able to be programmed to

obtain a direct trunk access to enable autodialing. Contact
your supplier for additional information.

9. The Mobile Linc-Up requires a custom factory setting to

work on these phones. Contact your supplier for more
information.

Содержание MC115A










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды