24-DBI DIRECTIONAL ANTENNA
6
For Horizontal Polarity:
Refer to
Figure 3-1
for proper feed alignment.
For Vertical Polarity:
Refer to
Figure 3-2
for proper feed alignment.
3. Determine the polarity of the antenna. (See
Figures 3-1
and
3-2
.)
4. Place the “L” bracket on the back of the antenna. Insert two carriage bolts from the front (see
Figure 3-4
)
to attach. Secure on the back with the lock washers and nuts (see
Figure 3-5
).
Figure 3-5. Attaching the “L” Bracket.
5. Re-check the dipole feed assembly for the proper polarity (see
Figures 3-1
and
3-2
).
6. Attach the feed on the front with two carriage bolts. Secure on the back with the lock washers and nuts
(see
Figure 3-4
),
7. Place the two mast clamps on the two U-bolts (see
Figure 3-6
). Fasten the U-bolts on the “L” bracket with
the four lock washers and nuts (see
Figure 3-5
).
Mast Clamp