Black Box LS4103A, Руководство пользователя

Страница: 42 / 46

39
CHAPTER 5: Configuration
Figure 5-21. System Backup screen.
Use this menu to back up configurations. To begin, click on the Backup Setting
button. Then follow the prompts to save new configurations to a designated
computer.
This menu lets you retrieve saved files. Either type in the file name or use the
Browse button to select the file. Then click on Restore Setting .
5.3 Configuring via CLI (Telnet)
Access the server via a remote computer using Telnet. After completing the steps
outlined to connect the devices (see
Section 3.7 ), proceed with the directions
below to log into the management facility using a remote computer. The server is
preset with a factory IP address. It’s important to do this so that the server doesn’t
conflict with other devices with the same defaults.
NOTE
Before following the instructions listed below for remote computer
login, make sure that a serial cable connection between the server and
the remote workstation exists.
Browse