724-746-5500 | blackbox.com
Page 13
Chapter 3: Installation
3. Installation
WARNING! When a connector is removed during installation, testing, or ser-
vicing, or when an energized fiber is broken, your eyes might be exposed to
to hazardous laser output power.
3.1 Mounting the Switch on a DIN Rail
1. Screw the DIN rail bracket onto the switch with the included bracket and screws.
2. Hook the switch-DIN-rail-bracket assembly over the DIN rail.
3. Push the bottom of the assembly towards the DIN rail until it snaps into place.
Figure 3-1. Din-rail mounting.