Black Box LH1706A-SC-AU, Руководство пользователя, Страница: 16 / 29

14
10/100 TO 100BASE-FX MEDIA CONVERTERS
set the optimum speed and duplex mode on the copper
segment. Skip the settings for DIP-switches 2 and 3 when
NWay is activated.
If your network device does
not
support NWay, set the
NWay DIP switch (#1) to OFF. Then use DIP-switch 2 to
manually select either half-duplex (HD) or full duplex
(FD) mode. Use DIP-switch 3 to manually select either
10- or 100-Mbps speeds. Set the NWay switch OFF when
connecting to an autosensing device that only supports
10/100-Mbps detection. Some earlier switch models
support only autosensing of speed,
not
autodetection of
speed and duplex mode (autonegotiation).
IMPORTANT!
In order to configure DIP-switches 2 (duplex mode) and 3
(speed), set DIP-switch 1 (NWay) OFF.
If you experience any of the problems listed below,
make
sure the NWay switch is properly set
.
1. The LNK LED is not lit and the connection
cannot be established.
2. The LNK LED is lit and the connection is fine, but
the converter cannot transmit or receive data.