Black Box LGC320A-NPS, Руководство пользователя

Страница: 9 / 16

Chapter 3: Install the Multi-Power Miniature Media Converter
10/100/1000
LGC320A-R2 724-746-5500 | blackbox.com Page 9
Connected to Chassis
NOTE
When using stranded wire, the leads must be tinned and equivalent to a 16 AWG solid
conductor. The DC terminal block is protected against mis-wiring. If the unit is mis-
wired, positive power lead to the negative terminal and negative power lead to the
positive terminal, it will not function. When powering a unit with voltages near the
upper limit of the device’s specification (for example: 48 volts) take precautions to limit
the voltage at the units terminal block. When turning on high voltage DC circuits, initial
voltages may momentarily exceed the unit’s specification.
3.2 DIN Rail Mounting
The Multi-Power Miniature Media Converter
10/100/1000 ships from the factory with DIN clips,
allowing installation on a DIN rail. The Multi-Power
Miniature Media Converter 10/100/1000 mounts
perpendicular to the DIN rail (as shown).
Use the supplied screws to attach the DIN clips to
the Multi-Power Miniature Media Converter
10/100/1000, then snap the converter to the DIN
rail.
To remove the converter from the DIN rail, use a
flat-head screwdriver in the slot to gently pry the
converter from the rail.
NOTE
The DIN clips are designed for use on a DIN-35 rail.