13
CHAPTER 1: HEADLINE
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
CHAPTER 3: INSTALLING THE SWITCH
3.5 INSTALLING SFP MODULES
You can install or remove an SFP module from a SFP port without having to power off the switch.
STEP 1: Insert the module into the SFP port.
STEP 2: Press firmly to ensure that the module seats into the connector.
FIGURE 3-5. INSTALLING AN SFP MODULE INTO AN SFP PORT
NOTE: The SFP ports use UL Listed Optional Transceivers, Rated 3.3Vdc, Laser Class 1. A list of compatible SPF modules is in the
table below.
The LGB2118A-R2 or LGB2126A switch supports the Small Form Factor Pluggable (SFP+) transceiver slots on ports 17–18
or 25–26.
The following table shows a list of Black Box transceiver types that have been tested with the switch.
TABLE 3-1. COMPATIBLE SFP/SFP+ MODULES
PRODUCT CODE
DESCRIPTION
LFP411
SFP, 1250-Mbps Fiber with Extended Diagnostics, 850-nm Multimode, 550 m LC
LFP412
SFP, 1250-Mbps Fiber with Extended Diagnostics, 1310-nm Multimode, 2 km LC
LFP413
SFP, 1250-Mbps Fiber with Extended Diagnostics, 1310-nm Single-Mode, 10 km LC
LFP414
SFP, 1250-Mbps Fiber with Extended Diagnostics, 1310-nm Single-Mode, 30 km LC
LFP415
SFP with SerDes Interface, 1250 Mbps, RJ45, 1000BASE-T, Extended Diagnostics
LFP416
SFP with SGMII Interface, 1250 Mbps, RJ45, 10/100/1000BASE-T, Extended Diagnostics
LFP418
SFP, 1250-Mbps Fiber with Extended Diagnostics, 1550-nm Single-Mode, 80 km, LC
LFP420
SFP, 1250-Mbps Simplex Fiber with Extended Diagnostics, 1550-nm TX, 1310-nm RX, Single-Mode, 10 km, LC
LFP421
SFP, 1250-Mbps Simplex Fiber with Extended Diagnostics, 1310-nm TX, 1550-nm RX, Single-Mode, 10 km, LC
LFP401
SFP, 155-Mbps Fiber with Extended Diagnostics, 850-nm Multimode, 2 km, LC
LFP402
SFP, 155-Mbps Fiber with Extended Diagnostics, 1310-nm Multimode, 2 km, LC
LFP403
SFP, 155-Mbps Fiber with Extended Diagnostics, 1310-nm Single-Mode, 30 km, LC
LPF404
SFP, 155-Mbps Fiber with Extended Diagnostics, 1310-nm Single-Mode, 60 km, LC
