The Trap Event status screen (see Figure 4-30) displays the switch’s trap information sent out while predefined
trap events occurred. To get to this screen, click on
Status
in the Maintenance menu in the Home screen, then
click on
Trap Event
from the Status menu.
Figure 4-30. Trap Event screen.
Table 4-24 describes the parameters shown in Figure 4-30.
Table 4-24. Trap Event screen options.
Parameter Description
Trap IP
This displays the IP address(es) of the device(s) that you selected
to collect data from. “Trap” means to collect data from the specified
IP address. One or two Trap IP addresses can be displayed.
Warm Boot
Check this box to select warm boot.
Cold Boot
Check this box to select cold boot.
Illegal Login
Check this box to count the number of illegal logins.
Illegal Login Counter
Displays the number of illegal login attempts.
Table 4-24 (continued). Trap Event screen options.
8-Port 1000BASE-TX Web-Smart Ethernet Switch with 2 SFP Dual Media Ports
54
