Black Box LES302A, Быстрый старт

Страница: 4 / 8

724-746-5500 | blackbox.com
Page 4
LES302A quick start guide
2-Port 10/100 Device Server RS-232/422/485 DB9 M Quick Start Guide
Installation Steps (LES302A-KIT or LES302AE-KIT):
1. Connect an LES302A to the supplied power adapter (PS012B [U.S.] or PS102BE [Europe]).
2. Connect an LES302A to your Ethernet network. Use a standard straight-through Ethernet cable to connect it to a hub/switch.
Use a crossover cable to connect it to a PC’s Ethernet port.
NOTE: If you connect the PC to the LES302A, make sure that the PC is in the same subnetwork as the LES302A.
3. Connect the LES302A‘s serial ports to two serial devices.
NOTE: You may need an LES30X-TB5 adapter for RS-422 or RS-485 applications.
4. You can mount the LES302A to a wallplate (mounting screws are included) or a DIN rail using the DIN rail kit (LES30X-DR).
QS.4 Software Setup
Table QS-2. Software default settings.
Default Network Setting Default User Name/Password
IP: 10.0.50.100 User name: admin
Gateway: 10.0.0.254 Password: null (leave it blank)
Subnet: 255.255.0.0 —
Auto IP (Dynamic IP):
A DHCP server can automatically assign the IP address and network settings. The LES302A supports the DHCP function. By
default, the DHCP function on the LES302A is disabled. You can use SerialManager.exe to enable this function (see Figure QS-2).
Figure QS-2. SerialManager.exe utility Dialog window.
Assign a Static IP address by: Using Telnet, SerialManager.exe utility, or Web browser.
Using Telnet
1. Telnet to the LES302A using the DOS command “Telnet IP_address.” Example: telnet 10.0.50.100
2. The LES302A’s network, link mode, and COM ports settings can be configured in the Telnet window.