Express Plus Ethernet Switch
8
-
The power outlet should be within 1.8 meters of the switch.
Deciding How to Install
Desktop or any flat surface
The switch can sit on desktop or any flat surface with adequate space and ventilation. If you
want to place it onto a shelf, make sure the shelf can withstand the weight of the switch.
Step 1:
Simply put the switch on the desired place.
Step 2:
Ensure the switch receives good ventilation.
Step 3:
Proceed to the “Connecting to Power” section.
Connecting to Power
Locate the supplied AC power cord.
Step 1:
Connect the AC power cord to the receptacle at the back of the switch.
Step 2:
Attach the plug into a standard AC outlet with a voltage range from 100~240Vac.
Step 3:
The power LED on the front panel will come on then.
Figure 5: Rear view of the switch
Connecting to Your Network
Cabling
Step 1:
First, ensure the power of the switch and end devices is turned off.
L
It may cause electric shock or any possible harm to you if the power is not switched off.
Step 2:
Prepare cable with corresponding connectors for each type of port in use.
Consult the table below for cabling requirements based on connectors and speed considerations.
Step 3:
Connect one end of the cable to the switch and the other end to a desired device.
Step 4:
Once the connections between two end devices are made successfully, turn on the power and the
switch is operational.
