Express Ethernet Switch: LB9017A-R3
User’s Manual
11
Connecting to Power
Locate the supplied AC power cord.
Step 1:
Connect the AC power cord to the receptacle at the back of the switch.
Step 2:
Attach the plug into a standard AC outlet with a voltage range from 100~240Vac.
Step 3:
The power LED on the front panel will then illuminate.
Figure 5: Rear view of the switch
Connecting to Your Network
Cabling
Step 1:
First, ensure the power of the switch (and end devices) is turned off.
L
It may cause an electric shock or any possible harm to you if the power is not switched off.
Step 2:
Prepare cable with corresponding connectors for each type of port in use.
(Consult the table below for cabling requirements based on connectors and speed considerations. )
Step 3:
Connect one end of the cable to the switch and the other end to a desired device.
Step 4:
Once the connections between two end devices are made successfully, turn on the power and the switch is operational.
