manualshive.com logo in svg

Black Box LB3104A series, Руководство по настройке

Поделиться
Скачать
Black Box LB3104A series Скачать руководство пользователя страница 75

ETHERNET EXTENDERS—CONFIGURATION GUIDE

72

C

ONNECTION ON

D

EMAND

In order to save money, you may want to limit the time that a link is kept open. COD allows you to determine
the traffic conditions that open and close the link. Using COD, a line is opened only when traffic conditions
fulfill specified conditions. When there is no need for a connection, the line is automatically terminated.

COD is only effective if:

• The line is connected to a modem or ISDN (a dialup link).

• The link is asynchronous.

• The Connection Type is Originate or Answer&Originate.  

If the Connection Type is Answer Only, the line connection is started when the unit is turned on in order to
receive calls. If the Connection Type is Originate Only or Answer&Originate, the connection will start when a
telephone number is defined. 

You need to configure:

• Start Connection.

• Terminate Connection.

Start Connection

Start Connection is used to determine under which conditions is a line established. To use this function, the
line must not be designated as Answer Only. After a physical connection is made, data is transferred.

Start Connection has 4 possible options:

• Upon Power Up—The connection is established when the unit is turned on. Upon Power Up is

recommended for leased lines only.

• Any Frame to Forward—The connection is established when any frame that is directed to the link arrives.  

• Specific Frame to Forward—The connection is established only when specific types of frames directed to

the link arrives. To determine which frames are establish a line, filters are used to. Specify the type of frame.

Any number of filters can be used. Filters work as an Boolean “OR”; by specifying a filter for frame type A
and filter for frame type B, you establish a line for Frame type A or Frame type B.

Choosing this option will automatically open the Advanced Filter menu, with Connect Operation selected.

• Never—The line is permanently cut off. In this case, you manually decide when to activate a line.

Содержание LB3104A series




































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды