19
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
RECEIVER VIDEO DISPLAY(S)
Two DisplayPort™ sockets are provided on the rear panel of each receiver module. Either all four possible MST streams are
provided at port 1 OR just the first and second streams are provided at ports 1 and 2. See page 25 for details about setting
changes.
TO CONNECT THE VIDEO DISPLAY
1 Connect the signal cable from your primary video display to port 1 on the
rear panel of the receiver module.
2 Repeat for the secondary (or duplicate) video display on port 2.
EDID MANAGEMENT
The EDID (Extended Display Identification Data) is read from the connected video display at the receiver module; it is then
transferred to, and stored within, the transmitter module and then declared to the host computer. If the video display is removed
then the cloned EDID stored at the transmitter module will still be presented to the video source.
To primary video display
or the first of multiple
MST-compliant displays
1
2
To secondary video display
MAXIMUM VIDEO RESOLUTIONS
The extenders support the following maximum video resolutions:
Fiber (up to 4km) or CATx (up to 100m
)
1 display at 4096 x 2160 / 60fps
(4K)
2 displays at 2560 x 1600 / 60fps
(WQXGA)
3 displays at 1920 x 1200 / 60fps
(WUXGA)
4 displays at 1920 x 1200 / 60fps
(WUXGA)
