Black Box KV9632A, Руководство пользователя

Страница: 19 / 28

Page 19
724-746-5500 | blackbox.com
Chapter 4: Operation
Manual Scan
enables users to manually switch back and forth between active
computers.
L-Ctrl + L-Ctrl + F2
To select the previous or the next computer, press the up-arrow key or down-
arrow key in sequence.
To abort the Manual Scan, press any other key.
To adjust Scan Rate, set the scan time before switching to the next computer:
L-Ctrl + L-Ctrl + F3
The KVM Switch generates 1 to 4 beeps indicating scan times of 3, 8, 15, and 30
seconds respectively.
Audio Stick
There are two options for Audio Stick: ON and OFF. When set to “ON,” audio
selection follows computer selection. When set to “OFF,” audio selection stops
following computer selection. Use this to listen to a particular computer’s audio
signal while operating other computers.
L-Ctrl + L-Ctrl + F5
The KVM switch beeps once or twice corresponding to ON or OFF respectively.
Force the audio signal to follow with the selected computer by pressing
the following hotkey:
L-Ctrl + L-Ctrl + A
USB-Port Rule
There are two options for setting the rule of USB 1 and USB 2 on the Console
side:
When set to “ON,” USB-Port selection follows computer selection.
When set to “OFF,” USB-Port selection stops following computer selection.
USB port setting for 2-Port model (KV9632A):
Press the hotkey below to turn ON/OFF both the USB 1 and USB 2 port Rule
L-Ctrl + L-Ctrl + F7