Black Box KV7012A, Инструкция по эксплуатации

Страница: 17 / 23

14
2- AND 4-PORT SERVSWITCH—DT PRO
NOTE
On some computers, you must enable USB support on your system
BIOS. Please refer to your computer manufacturer’s manual or the
motherboard manual to verify that USB support is enabled.
PS/2 Installation
1. Connect the ServSwitch PS/2 CPU Cable (EHN7001213PV-0006) to the
computer’s PS/2 keyboard, PS/2 mouse, and HD15 ports.
2. Connect the other end of the cable to the ServSwitch unit’s HD15 connector.
See Figure 3-5.
Figure 3-5. PS/2 computer connections.
NOTE
PS/2 computers without USB ports are not able to use the built-in USB
2.0 peripheral hub.
3.2.4 C
ONNECTING THE
USB P
ERIPHERALS
Attach up to two or four USB peripherals to the USB Type A connectors on the
ServSwitch. See Figure 3-6.
NOTE
You can attach a USB keyboard and mouse, but hotkey switching will
not be enabled for these connections.
PS/2
computer