724-746-5500 | blackbox.com
Page 3
Category 5e High-Density Feed-Through Patch Panels
We‘re here to help! If you have any questions about your application
or our products, contact Black Box Tech Support at
724-746-5500
or go to
blackbox.com
and click on “Talk to Black Box.”
You’ll be live with one of our technical experts in less than 20 seconds.
4. When using the shielded High-Density Feed-Through Patch Panels, make sure to attach the necessary drain wires. Use one
drain wire for each shielded module on the patch panel. Attach the drain wire in either of the two places as shown in Figure
3-1. Connect the other end of the drain wire to proper ground.
Figure 3-1. Drain wire installation options for shielded models.
5. Use cable ties to secure the cables to the cable management bar. See Figure 3-2.
Figure 3-2. Completed installation.
Lower right view
Top left view
