14
DIGITAL I/O CARD–16
4. Installation
The Digital I/O Card–16 can be installed in any PC expansion slot. Before you
install the card, make sure you have followed the configuration instructions in
Chapter 3
.
To install the card:
1. Turn off all PC power and disconnect the power cord.
2. Remove the cover of the PC case.
3. Locate two available slots and remove the blank metal slot covers.
4. Gently insert the Digital I/O Card–16 into the slot. Make sure the card is
seated properly. Insert the cable bracket into the adjacent slot and screw it in
place.
5. Replace the PC’s cover.
6. Connect the power cord.
Installation is complete.
