manualshive.com logo in svg

Black Box IC132C, Руководство пользователя

Поделиться
Скачать
Black Box IC132C Скачать руководство пользователя страница 15

14

4-PORT RS-232 PCI AND HS PCI SERIAL ADAPTERS

Properties.” Choose the “Device Manager” tab and double-click on the “Multi-
Function Adapter” heading. This will show all the information concerning the PCI
serial adapter. Choose the “Resources” tab, which will show all resources assigned
to the PCI adapter. Uncheck the “Use Automatic Settings” box. Five input/output
(I/O), ranges will be listed. The first I/O range is for the PCI bus and should not
be changed. The second and third I/O ranges are the ones that need to be
changed in order to have those ports enumerated as COM:3 and COM:4. Double-
click on the second I/O range; this allows you to change the address. Highlight the
entire I/O range and type: 

03e8–03ef

for COM:3. Click 

OK

. Windows will

inform you that you have made modifications that may affect other devices. Click

OK

. Next, double-click on the third I/O range. Highlight the entire I/O range

and type: 

02e8–02ef

for COM:4.  Again, Windows will inform you that you have

made modifications that may affect other devices. Click 

OK

.

Following these steps will change the COM: number assignments on the first two
ports to COM:3 and COM:4.

Содержание IC132C




























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды