
SALES: 0118 965 5100
Introduction
This manual provides information covering installation and set-up procedures of the G-
Converter 2048 Channel Card.
This card is designed to be used in conjunction with an G-Converter Chassis, for which there
is a separate manual.
G-Converter 2048 Channel Cards are interface adapters that will convert between a G.703
link and an X.21/V.11 interface or optionally V.35.
The intended use of this unit is to terminate G.703 links
G-Converter 2048
The G-Converter 2048 is a low cost simple converter. The card has no management and can
only be configured using link settings. A G-Converter manager card will not recognise a G-
Converter 2048 Channel Card.
The G-Converter 2048 Channel Card has a Bi-coloured LED mounted on the front panel, this
indicates the card status.
Functional Overview
The G-Converter 2048 Channel Cards provide interfaces and rate conversion between G.703
data stream and X.21/V.11 or optionally V.35 interface.
The E1 connection is via either an RJ45 connector offering a120 Ohm balanced impedance or
two BNC connectors offering unbalanced 75-Ohm impedance. The X.21/V.11 connection is
via a 15-way D type connector. V.35 connection is also available on a 15-way D type
connector, a conversion cable providing MRAC connection is available as an option.
6
G-Converter 2048 Channel Card