Copyright
2006 Ringdale User Manual, 62-15820000 Page 24
24
24
24 of
of
of
of 49
49
49
49
5, 6, 7)
Timeserver 1 address
....192.043.244.018 – The 192.043.244.018
address is the time server at NCAR. You can change this to a preferred
timeserver and add two more timeservers. Without a timeserver the
timestamp will be incorrect and your spam filter may trap the email.
NOTE
: All timeservers send the time UT. In order to set the time stamps correctly
you must adjust your
Time Zone Offset
in the
Setup Fax
section.
There is a list of public timeservers at this URL:
http://tf.nist.gov/service/time-servers.html
R) Press
R
when the Unit IP settings are all configured to return to the top
menu.
NOTE:
Unlike all of the other setup parameters, IP addresses do not take effect
immediately, because a change to those would cut off the telnet session. You can use the
“Reboot after quitting” to enable the IP addresses without disconnecting power.
To enable IP Addresses:
1) Save each setting.
2) In the initial menu, set “
Reboot after quitting
” to
Enabled
.
3) Use
Q
to quit and select
Y
to the question:
“
Do you want to save your
changes before quitting (Y/N)
”.
