ELITE II SERVER CABINET
14
3.8 Anti-Tip Leg Assembly
Anti-tip legs reduce the cabinet’s chance of tipping over because of equipment extending beyond the
enclosure’s front.
Use the anti-tip assembly when the enclosure is mounted on leveling glides or casters. When neither glides or
casters are used, the enclosure must be securely anchored to the floor.
IMPORTANT!
Before extending any equipment beyond the front of the enclosure, make sure that:
•
Both anti-tip assemblies are fastened to the enclosure according to the instructions
in this section.
•
All hardware securing the anti-tip legs to the enclosure is tightened properly.
•
The glides on each leg’s bottom front end are adjusted and are firmly
contacting the floor.
1. Figure 3-14 shows the leg assembly when it is fully retracted. Figure 3-15 shows it fully extended. Verify that
each leg travels freely from its fully retracted to fully extended position.
Figure 3-14. Fully retracted leg assembly.
1
⁄
4
-20 bolts
Flat washers
Threaded holes
Retractable leg
Front end
Adjustable glide
Stationary channel
