First press F2 (Select) to highlight the
value you want to edit. Then use the up-
and down-arrow keys to change the
displayed values in small increments such
as 0.1 dB or 1 m, or use the left- and
right-arrow keys to change the displayed
values in large increments such as 1 dB
or 100 m.
4. Press F1 (Save) to open the Overwrite
Autotest screen. It contains a list of four
user-definable Autotest names (User 1,
User 2, User 3, and User 4).
5. Use the up- and down-arrow keys to
highlight one of the four Autotest names
you want to overwrite with the new
testname and settings. (To ensure that the
default Autotests are not overwritten, the
asterisk preceding the names of edited
existing Autotests cannot be removed.)
6. Press F1 (Select) to save the Autotest and
list the new test name in the Autotest
screen.
7. Press F1 (Select) to select the highlighted
Autotest as the test to run and return to
the Autotest-Setup screen.
CERTIFIBER™
26
