Black Box BDS-8FHA, Быстрый старт, Страница: 3 / 12

3
1.877.877.2269 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
INSTALLATION STEPS
This quick start guide explains how to install the BDS Temperature Kiosk. Follow the steps listed next.
NOTE: The BDS Management software is named EZ-Pass in the software screens you will see.
STEP 1. CONNECT THE GATE
Connect the tablet relay cable to the door open button terminal of the gate control board. If the door opening action is reversed, reverse
the line order.
Š
Š
If there is no response, set in the BDS (EZ-Pass) app as follows:
Š
Š
Mode 0: Indicates non-automatic closing mode. The relay will not close automatically after opening the relay.
Š
Š
Mode 1: Represents the auto-closing mode (active high-default low level, then high level for X seconds, last low level). The relay will
automatically close after a delay of X seconds after opening the relay.
Š
Š
Mode 2: Represents the auto-closing mode (active low-default low, then high for X seconds, and finally low). The relay will automatically
close after a delay of X seconds after opening the relay.
STEP 2: REVIEW THE PORTS DEFINITION
2.1 WIRE INTERFACE DEFINITION VERSION 1
12 VDC
USB Host
UBOOT
Wiegand
Output
Wiegand
Input
USB OTG
Relay
Ethernet
RS-232
FIGURE 1.
TABLE 1. DELAY
PIN NUMBER TERMINAL ELECTRICAL DEFINITION
1 COM
2 NO