Black Box AVX-VGA-TP-CSRX, Руководство пользователя

Страница: 30 / 48

724-746-5500 | blackbox.com
Page 30
Chapter 4: Operation
4. Operation
4.1 Video Adjustment on Receiver/Cascadable Receiver Unit
To optimize the video signal associated with various cable lengths, users may adjust
the video compensation on the Receiver/Cascadable Receiver Unit. It follows the
order in sequence of: EQ—>Gain—>Skew (Red—>Green—>Blue)—>EQ—>
Gain…
STEP 1:
Press and hold the “Mode” button for two seconds. When the “EQ” LED
flashes yellow with one beep, the receiver enters video adjustment mode.
STEP 2: Press the “+” or “-” button once (you will hear a clicking sound) to increase
or decrease one level of video adjustment. You will hear a long buzzer
when the receiver reaches its limit.
STEP 3:
Press the “Mode” button to go to the next phase (Gain). The “Gain” LED
flashes yellow with one beep sound. Follow STEP 2 above for adjustment.
STEP 4: Press the “Mode” button to go to the next phase (Skew). The “Skew” LED
flashes red/green/blue with one beep sound. Follow STEP 2 above for
adjustment. The “Skew” LED flashes red, green, or blue to indicate which
color is being adjusted. You will hear a long buzzer sound when the
receiver reaches its limit.
STEP 5:
Press and hold the “Mode” button for two seconds. You will hear one beep
when the receiver exits Video Adjustment mode.
NOTE: The timeout is set around 20 seconds.
Table 4-1. LED indicators in Video Adjustment Mode.
LED Status
EQ Flashing Yellow: Adjust EQ
Gain Flashing Yellow: Adjust Gain (brightness)
Status (Skew)
Flashing Red: Adjust Skew (Red)
Flashing Green: Adjust Skew (Green)
Flashing Blue: Adjust Skew (Blue)