Black Box AVS-HDB-RX, Руководство пользователя

Страница: 14 / 20

Page 14 877-877-2269 | blackbox.com
Chapter 2: Overview
Table 2-2. Receiver components.
Number in
Figure 2-3 or 2-4 Component Description
1 On LED • Blinks green when unit is working.
• Turns OFF when unit is not working.
2 Link LED Twisted pair status indicator: lights green
when the connection is good.
3 HDCP LED • Lights green when the connected device
supports HDCP.
• Blinks green whent he connected device
does not support HDCP.
4 Power LED Lights red when power is on.
5 RJ-45 connector HDBT IN: Connects to the HDBT Out port of
the transmitter via a CAT5e /CAT6 cable.
6 HDMI connector HDMI Out: Connects to the HDMI display.
7 IR In sensor Connects to the IR receiver to send signal from
the AVS-HDB-TX to the AVS-HDB-RX.
8 IR out sensor Connects to the IR transmitter to receive IR
signal from the AVS-HDB-RX.
9 3-pin terminal
block RS-232 serial port: connects to the control
terminal and supports bidirectional RS-232
control.
10 Barrel connector Links to a 24-VDC power supply.
NOTE: The power supply is not required at the
receiver (AVS-HDB-RX if the transmitter
(AVS-HDB-TX) connects to a power
supply.